Spartan J114

New Member
How's it going everyone. I'm Spartan 114 and I've been a Halo cosplayer/prop maker for about 3 years now and I've been using the 405th website for most of my journey. I never posted anything because of my lack of quality camera, I have recently replaced my old phone with a new one and as such I have gained access to a better camera. As of the time of this post it is night time and I don't have any quality photos of my Work In Progress Armour but as soon as i can i will be updating this thread with pictures. Im hoping to become more un touch with the 405th community, specifically anyone is Australia as that is where i am located. That's all of now but if you happen to see this... please say hi, I'd love to begin talking with fellow halo fans/cosplayers. Spartan 114, Signing off
 

PlanetAlexander

Active Member
Hoorah! We got another Aussie in the ranks, welcome to the 405th! Which part of Australia do you hail from?
Looking forward to seeing some pictures, don't worry about quality too much, I think we all would rather spend time working on our projects then getting the best possible WIP pictures.
 

Spartan J114

New Member
Hoorah! We got another Aussie in the ranks, welcome to the 405th! Which part of Australia do you hail from?
Looking forward to seeing some pictures, don't worry about quality too much, I think we all would rather spend time working on our projects then getting the best possible WIP pictures.

I Hail from Queensland, and now that it is day time I will be adding pictures to this thread
 

Spartan J114

New Member
Hoorah! We got another Aussie in the ranks, welcome to the 405th! Which part of Australia do you hail from?
Looking forward to seeing some pictures, don't worry about quality too much, I think we all would rather spend time working on our projects then getting the best possible WIP pictures.
I Dont know if you know this PlanetAlexander, be we've actually met once before
 

Spartan J114

New Member
How's it going everyone. I'm Spartan 114 and I've been a Halo cosplayer/prop maker for about 3 years now and I've been using the 405th website for most of my journey. I never posted anything because of my lack of quality camera, I have recently replaced my old phone with a new one and as such I have gained access to a better camera. As of the time of this post it is night time and I don't have any quality photos of my Work In Progress Armour but as soon as i can i will be updating this thread with pictures. Im hoping to become more un touch with the 405th community, specifically anyone is Australia as that is where i am located. That's all of now but if you happen to see this... please say hi, I'd love to begin talking with fellow halo fans/cosplayers. Spartan 114, Signing off
As promised here are some pictures of my Halo MK V Chestplate
 

Attachments

  • 20201001_115540.jpg
    20201001_115540.jpg
    1.3 MB · Views: 29
  • 20201001_115547.jpg
    20201001_115547.jpg
    2.4 MB · Views: 32
  • 20201001_115555.jpg
    20201001_115555.jpg
    2.6 MB · Views: 27
  • 20201001_115636.jpg
    20201001_115636.jpg
    1.5 MB · Views: 25
  • 20201001_115646.jpg
    20201001_115646.jpg
    1.2 MB · Views: 29

Spartan J114

New Member

Attachments

  • 20201001_115925.jpg
    20201001_115925.jpg
    6.3 MB · Views: 15
  • 20201001_115933.jpg
    20201001_115933.jpg
    2.8 MB · Views: 13
  • 20201001_115940.jpg
    20201001_115940.jpg
    1.2 MB · Views: 12
  • 20201001_115944.jpg
    20201001_115944.jpg
    1.2 MB · Views: 10
  • 20201001_115950.jpg
    20201001_115950.jpg
    834.4 KB · Views: 10
  • 20201001_115955.jpg
    20201001_115955.jpg
    1.5 MB · Views: 11
  • 20201001_120011.jpg
    20201001_120011.jpg
    1.6 MB · Views: 13
  • 20201001_120017.jpg
    20201001_120017.jpg
    1.7 MB · Views: 15

Spartan J114

New Member
Here are the biceps and shoulders, I still need to Attach them both together
Next up are the forearms, these are the second oldest parts of this armor and I am considering rebuilding them alongside the shins which are currently the oldest part of this armor set
 

Attachments

  • 20201001_120034.jpg
    20201001_120034.jpg
    1.7 MB · Views: 10
  • 20201001_120040.jpg
    20201001_120040.jpg
    1.2 MB · Views: 10
  • 20201001_120045.jpg
    20201001_120045.jpg
    1.9 MB · Views: 9
  • 20201001_120050.jpg
    20201001_120050.jpg
    1.6 MB · Views: 10

Spartan J114

New Member
Next up are the forearms, these are the second oldest parts of this armor and I am considering rebuilding them alongside the shins which are currently the oldest part of this armor set
Here are the Shins, as you can see they are not that great when it comes to quality, i started this project way back in late 2018 when i was still a noob when it comes to foamsmithing, I have scrapped and rebuilt many of the armour components including the forearms, thighs, Chestplate, biceps, shoulders boots and the shins. The shins are the only part of the old prototype to still be a part of my current set. I used to use hot glue back then but as all my fellow Aussies will know, hot glue melts in the sun sometimes causing high stress points to come apart.
 

Attachments

  • 20201001_120104.jpg
    20201001_120104.jpg
    1.4 MB · Views: 11
  • 20201001_120143.jpg
    20201001_120143.jpg
    2 MB · Views: 11

Spartan J114

New Member
Here are the Shins, as you can see they are not that great when it comes to quality, i started this project way back in late 2018 when i was still a noob when it comes to foamsmithing, I have scrapped and rebuilt many of the armour components including the forearms, thighs, Chestplate, biceps, shoulders boots and the shins. The shins are the only part of the old prototype to still be a part of my current set. I used to use hot glue back then but as all my fellow Aussies will know, hot glue melts in the sun sometimes causing high stress points to come apart.
Here is one of the knees, the other one is not printed and this still needs weathering like most of the armor
 

Attachments

  • 20201001_120200.jpg
    20201001_120200.jpg
    1.5 MB · Views: 10
  • 20201001_120207.jpg
    20201001_120207.jpg
    1.6 MB · Views: 9

Spartan J114

New Member
Here is one of the knees, the other one is not printed and this still needs weathering like most of the armor
Here is one of the knees, the other one is not printed and this still needs weathering like most of the armor
Up next is the cod/abdominal section, this part still needs sealing and painting
 

Attachments

  • 20201001_120226.jpg
    20201001_120226.jpg
    1.4 MB · Views: 10
  • 20201001_120239.jpg
    20201001_120239.jpg
    1.2 MB · Views: 10
  • 20201001_120232.jpg
    20201001_120232.jpg
    1.3 MB · Views: 9

Spartan J114

New Member
Here is my neck section, it still needs Velcro on the wider area to attach my Chestplate
Here are both of the MK V helmets, the green one was a prototype that I made before I understood how to edit 3d files and as such there are a lot of visible seam lines and thats why i made this one my "Battle Damaged" variant. The other helmet is still being worked on but is of much higher quality.
 

Attachments

  • 20201001_120409.jpg
    20201001_120409.jpg
    2.8 MB · Views: 33
  • 20201001_120417.jpg
    20201001_120417.jpg
    2.6 MB · Views: 29
  • 20201001_120426.jpg
    20201001_120426.jpg
    2.7 MB · Views: 26
  • 20201001_120609.jpg
    20201001_120609.jpg
    1.1 MB · Views: 30

Harri51

RMO
405th Regiment Officer
Going to have to follow my bois. Once again. You are doing so well in your progress spartan. Be proud of your suit and the work you are doing! Can’t wait to see more!
 

TheRealVictor

New Member
How's it going everyone. I'm Spartan 114 and I've been a Halo cosplayer/prop maker for about 3 years now and I've been using the 405th website for most of my journey. I never posted anything because of my lack of quality camera, I have recently replaced my old phone with a new one and as such I have gained access to a better camera. As of the time of this post it is night time and I don't have any quality photos of my Work In Progress Armour but as soon as i can i will be updating this thread with pictures. Im hoping to become more un touch with the 405th community, specifically anyone is Australia as that is where i am located. That's all of now but if you happen to see this... please say hi, I'd love to begin talking with fellow halo fans/cosplayers. Spartan 114, Signing off
The quality of your work isn't directly reflected by the type of camera you use. Good luck and look forward to seeing more!!
 
Top